国产成人高清亚洲一区app,在线观看视频一区,最新国产毛片,日韩爱爱视频

  Homepage      Favorite      中文版
Home About Us News info Products Services Recruitment Contact us
NEWS CENTER
Company News
Trade News
Exhibitions
Videos
CONTACT US
Headquarter: No. 18, Yangguang Road, Xinyang Industrial Area, Haicang, Xiamen, P.R.China 361022
Tel: +86-592-6539999
E-mail: bussiness@xmzzj.com

NEWS CENTER
Location:Home → News Center
How to repair and maintain the loader gearbox
Public date:2018-7-27   Hits:17654
Hydraulic transmission oil is the energy carrier for the normal operation of the gearbox. In the hydraulic transmission system, the pressure, temperature and flow of the working fluid determine whether the transmission can work normally. Therefore, special attention should be paid to the daily maintenance of the transmission. Inspection and replacement of hydraulic transmission oil. 1. Fixed oil change interval
Changing oil at the right time intervals is the key to getting the longest working life of the components in the gearbox. Lubrication and protection of lubricating oils can only be achieved if a reasonable oil change interval is ensured.
Under normal circumstances, it should be based on the maintenance cycle recommended by the whole machine manufacturer, but this can only be relative. It must be combined with the oil sample extraction analysis results to know the actual working conditions. For example, in the maintenance manual, the oil change interval of the gearbox is 1000h. According to the operation of the loader, the oil sample is sampled every 500h or 250h to determine when to change the oil, but the oil should be used up to 1000h. Replace it now. In addition to regular replacement of new oil, in the usual inspection, if the oil is found to be deteriorated or mixed with impurities, it should also be cleaned and replaced with new oil.
2, using the correct row, oil change method
When draining oil, the oil temperature should reach 40~50 °C, and the oil flow should be discharged under agitation. The dirty oil should be drained as completely as possible. When refueling, the oil should be added by using a tanker with a filtering device.
3. Use the correct transmission system oil, the lubricant used in the gearbox must meet the specifications.
4. Refer to the replacement filter period provided in the service manual and replace the filter in time.
5, all kinds of lubricants must be pure, and after a period of precipitation, in line with the specified quality requirements.
    Therefore, it is necessary to strengthen the fault prevention and daily maintenance of the gearbox during daily use, which not only can reduce the work efficiency caused by the shutdown and maintenance, delay the working hours, but also prevent and avoid further follow-up faults. The occurrence, reduce maintenance costs, improve the safety of the machine.
Previous  |  Next  |   Return to
About Us
Company profile
Culture
Organizational
Development
Subsidiaries
Certificates
Products
Wheel Loader
Block Handling Wheel Loader
Excavator
Other
Spare Parts
News
Company News
Trade News
Exhibitions
Videos
Services
Marketing
After Services
Question
Downloads
Recruitment
Talent Concept
Jobs
Contact Us
Feedback
Contact us
Copyright 2014- (C) Xiamen Loaders Co., Ltd. All Rights Reserved.
Two-dimensional [Close]

點擊這里給我發(fā)消息
點擊這里給我發(fā)消息
聂拉木县| 彩票| 沈阳市| 开阳县| 怀柔区| 酉阳| 巴青县| 监利县| 伊金霍洛旗| 曲靖市| 兴仁县| 丰顺县| 全州县| 永和县| 凤翔县| 静安区| 新邵县| 达拉特旗| 左云县| 彭州市| 和顺县| 禹州市| 清河县| 峡江县| 新龙县| 新营市| 临漳县| 合肥市| 桂阳县| 墨竹工卡县| 无为县| 临武县| 浦北县| 绥阳县| 万盛区| 土默特左旗| 襄垣县| 滦南县| 赫章县| 金山区| 温州市|